SK75GD07E3ETE2 ? by semikron rev. 0.2 ? 10.02.2017 1 semitop ? e2 gd-et igbt module engineering sample SK75GD07E3ETE2 target data features ? low inductive design ? press-fit contact technology ? rugged mounting due to integrated mounting clamps ? heat transfer and insulation through direct copper bonded aluminium oxide ceramic (dbc) ? 650v trench igbt technology ? robust and soft freewheeling diode cal technology ? ul recognized file no. e 63 532 ? integrated ntc temperature sensor typical applications* ? inverter up to 41kva ? typical motor power 18.5kw absolute maximum ratings symbol conditions values unit inverter - igbt v ces t j =25c 650 v i c t j = 175 c t s =25c 66 a t s =70c 53 a i cnom 75 a i crm i crm = 3 x i cnom 225 a v ges -20 ... 20 v t psc v cc = 360 v v ge 15 v v ces 650 v t j =150c 6s t j -40 ... 175 c inverse - diode v rrm t j =25c 600 v i f t j = 175 c t s =25c 70 a t s =70c 55 a i fnom 75 a i frm i frm = 2 x i fnom 150 a i fsm 10 ms, sin 180, t j =150c 395 a t j -40 ... 175 c module i t(rms) t terminal = 100 c, t s = 60c t.b.d. a t stg -40 ... 125 c v isol ac, sinusoidal, t = 1 min 2500 v characteristics symbol conditions min. typ. max. unit inverter - igbt v ce(sat) i c =75a v ge =15v chiplevel t j =25c 1.45 1.77 v t j =150c 1.70 2.15 v v ce0 chiplevel t j =25c 0.75 0.90 v t j =150c 0.68 0.83 v r ce v ge =15v chiplevel t j =25c 9.3 12 m t j =150c 14 18 m v ge(th) v ge =v ce , i c =1.2ma 55.86.5v i ces v ge =0v, v ce = 650 v, t j =25c -ma c ies v ce =25v v ge =0v f=1mhz 4.62 nf c oes f=1mhz 0.288 nf c res f=1mhz 0.137 nf q g - 8 v...+ 15 v 680 nc r gint t j =25c 0 t d(on) v cc = 300 v i c =75a r g on =6 r g off =6 v ge = +15/-8 v t j =150c ns t r t j =150c ns e on t j =150c 1.1 mj t d(off) t j =150c ns t f t j =150c ns e off t j =150c 2.55 mj r th(j-s) per igbt 1.1 k/w
SK75GD07E3ETE2 2 rev. 0.2 ? 10.02.2017 ? by semikron semitop ? e2 gd-et igbt module engineering sample SK75GD07E3ETE2 target data features ? low inductive design ? press-fit contact technology ? rugged mounting due to integrated mounting clamps ? heat transfer and insulation through direct copper bonded aluminium oxide ceramic (dbc) ? 650v trench igbt technology ? robust and soft freewheeling diode cal technology ? ul recognized file no. e 63 532 ? integrated ntc temperature sensor typical applications* ? inverter up to 41kva ? typical motor power 18.5kw characteristics symbol conditions min. typ. max. unit inverse - diode v f = v ec i f =75a chiplevel t j =25c 1.43 1.80 v t j =150c 1.44 1.71 v v f0 chiplevel t j =25c 0.99 1.10 v t j =150c 0.80 0.89 v r f chiplevel t j =25c 5.9 9.4 m t j =150c 8.5 11 m i rrm i f =75a v ge =-8v v cc = 300 v t j =150c -a q rr t j =150c -c e rr t j =150c 1.85 mj r th(j-s) per diode 1.35 k/w module l ce t.b.d. nh m s to heatsink 2 2.1 nm w34g temperature sensor r 100 t c =100c (r 25 =5 k ) 493 5% b 100/125 r (t) =r 100 exp[b 100/125 (1/t-1/t 100 )]; t[k]; 3550 2% k
SK75GD07E3ETE2 ? by semikron rev. 0.2 ? 10.02.2017 3 semitop ? e2 gd-et
SK75GD07E3ETE2 4 rev. 0.2 ? 10.02.2017 ? by semikron this is an electrostatic discharge sensitive device (esds), international standard iec 60747-1, chapter ix. *important information and warnings the specifications of semikron products may not be consid ered as guarantee or assurance of product characteristics ("beschaffenheitsgarantie"). the specifications of semikron products describe only the usual characteristics of products to be expected in typical applications, which may still vary depe nding on the specific application. therefore, products must be tested for the re spective application in advance. application adjustments may be necessary. the user of semikron products is responsible for the safety o f their applications embedding semikron pr oducts and must take adequate safety measures to prevent the applications from causing a phys ical injury, fire or other problem if any of semi kron products become faulty. the user is responsible to make su re that the applicat ion design is compliant with all applicable laws, regulati ons, norms and standards. exce pt as otherwise explicitly approved by semikron in a written document signed by authorized representatives of semikron, semikr on products may not be used in any applications where a failur e of the product or any consequences of the use thereof can reasonably be expected to result in person al injury. no representation o r warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including wi thout limitation, warranties of non-infringement of intellectual property rights of any third party. semikron does not assume any liability arisi ng out of the applications or use of any product; neither does it convey an y license under its patent rights, copyrights, trade secrets or ot her intellectual property rights, nor the rights of others. semikron makes no re presentation or warranty of non- infringement or alleged non-infr ingement of intellectual property rights of any third party which may arise fr om applications. due to technica l requirements our products m ay contain dangerous substances. for information on the types in question pl ease contact the nearest semikron sales office. this document supersedes and replaces all information previously supplied and ma y be superseded by updates. semikron reserves the right to ma ke changes. in accordance with the quality guidelines of semikron, we woul d like to point out that the products are engineering samples. th ese engineering samples are not yet produced under quality conditions approaching those of series production, and are at the presen t time not included in the semikron quality monitoring and control process. neither the product nor the prod uction process has to date gon e completely through the semikron internal authorization procedure. semikron may make any amendments without any prior notification. semikro n cannot and shall not promise or commit itself to release and/or make available a final version or series product after the deve lopment phase. semikron cannot and will not assume any responsibility with regard to freedom from defects, functionality, and adaptation to an d interaction with possible applications of the user or with regard to any other potential risks resulting fr om the use of engineering sample s. therefore semikron explicitly excludes any warranty an d liability; as far as legally possible. the customer shall fully indemnify and hol d harmless semikron from any and all risks, damages, lo sses, expenses and costs dire ctly or indirectly resultin g out of or in connection w ith the commissioning, operation, system integration, sale, dissemination or any other kind of use of engineering samples by the custom er and/or any third party, which has come into possession of engineering samples through or be cause of the customer. all know-how and all reg isterable and non-registerable copyrights an d industrial property rights arising from or in connection with these engineering samples rem ain the exclusive property of semikron.
|
